Scope · Smart devices

Printers, phones, CCTV and smart devices in Cyber Essentials scope

IASME says printers are not in Cyber Essentials scope. How v3.3 treats CCTV, VoIP phones and building systems, sub-sets, default passwords and firmware.

Updated 9 November 2026
Short answer

Printers are out of scope for Cyber Essentials. IASME's scope FAQ answers 'No, printers are not deemed to be in the scope of Cyber Essentials', and v3.3 never names them. A printer's cloud portal can still be a cloud service (A2.9) and a port forward to it is an inbound rule (A4.8). Other smart devices follow the v3.3 scope test.

Key facts
Printers
Named in v3.3?
CCTV, VoIP handsets, building systems
Removing devices from scope
Default passwords
Cloud portals
Source

Are printers in scope for Cyber Essentials?

No. IASME, which runs Cyber Essentials, answers the question directly in its Knowledge Hub scope FAQ (page updated 12 February 2026, checked 9 November 2026): 'No, printers are not deemed to be in the scope of Cyber Essentials.' An earlier Knowledge Hub answer (October 2023, checked 9 November 2026) adds: 'Printers are not mentioned in the CE requirements and are considered out of scope of the assessment. CE+ absolutely allows printing from home computers/VDI.'

So you do not list printers or multifunction devices in the question set, and they are not a reason to declare a partial scope. Three things around a printer can still be in scope. The computers and servers that print to it are. A cloud print or fleet management portal that your staff sign in to is a cloud service if it meets the v3.3 definition, so it goes in A2.9 with MFA. And a port forward through your boundary firewall to a printer is an inbound connection that A4.8 asks you to approve and document.

What does v3.3 say about smart devices?

Nothing by name: v3.3 never uses the words printer, CCTV, camera or IoT, and no Danzell question asks you to list them. It does give definitions and one scope test that settle most cases.

  • Devices 'includes all types of hosts, networking equipment, servers, networks, and end user devices such as desktop computers, laptops, thin clients, tablets and smartphones - whether physical or virtual'.
  • Software includes 'operating systems, commercial off-the-shelf applications, extensions, interpreters, scripts, libraries, network software and firewall and router firmware'.
  • Organisational service lists examples including web applications, Microsoft 365, Citrix Desktop and IP telephony.
  • A cloud service is an on-demand, scalable service on shared infrastructure, accessed over the internet through an account, that stores or processes data for your organisation.
  • The requirements apply to all devices and software in scope which can accept incoming network connections from internet-connected devices, can establish outbound connections to devices via the internet, or control the flow of data between those devices and the internet.

Are CCTV cameras, VoIP phones and building systems in scope?

IASME's Knowledge Hub gives no answer for these devices (we searched it on 9 November 2026), so the v3.3 scope test decides, and how it applies to them is our interpretation rather than an IASME ruling. The 'Applies to' line of each control names servers, desktop computers, laptops, tablets, mobile phones, thin clients, boundary firewalls, routers, IaaS, PaaS and SaaS, and none of these devices is on those lists.

Our interpretation: a camera, phone handset or building controller on an in-scope network that can reach the internet meets the v3.3 scope test even though no control names its type, so the choices are to secure it or to segregate it. v3.3 says you must agree the scope with the Certification Body before assessment begins, so raise these devices then.

How common non-computer devices fit the v3.3 scope rules. The printer and switch rows are IASME's Knowledge Hub answers; every other row is our interpretation, not an official NCSC or IASME table.
Device typeIn scope whenTypical fix
Network printers and multifunction devicesNot in scope: IASME says printers 'are not deemed to be in the scope of Cyber Essentials'Nothing to declare. Good practice: change the default admin password and keep firmware supported
Network switchesIASME's scope FAQ answers 'No'. The A2.5 guidance asks you to list a switch only if it contains a firewall or routes internet trafficList in A2.5 only if it does either
VoIP desk phonesThe handset is on an in-scope network and reaches the internet; the hosted telephony platform is an organisational service (IP telephony) and, if it meets the definition, a cloud serviceList the telephony platform in A2.9 with MFA enforced; change default handset admin PINs; apply firmware through the provider's provisioning
CCTV cameras and NVRsA port forward or vendor cloud app gives remote viewing, which means inbound or outbound internet connectionsRemove port forwards or approve and document them (A4.8); change default passwords; update firmware; or segregate on a VLAN
Smart TVs and meeting-room displaysThey connect to the internet for apps, casting or updates while on an in-scope networkSegregate them on a separate VLAN or behind a firewall (a guest Wi-Fi network only counts if it is one of those), remove unused apps, and turn on automatic updates
Door access and building managementControllers are cloud-managed or the vendor has remote access through your firewallTreat the management portal as a cloud service with MFA; document any inbound rule for vendor access; segregate the controllers

How do I take smart devices out of scope with a sub-set?

With a firewall or a VLAN and nothing else. v3.3 defines a sub-set as 'part of the organisation whose network is segregated from the rest of the organisation by a firewall or VLAN', and the A2.2.2 guidance adds: 'Sub-sets must be created using a firewall or VLAN - other methods such as security groups, microsegmentation or software-based methods are not compliant.' IASME's scope FAQ adds that segregation 'must be done at Layer 2 or Layer 3 of the OSI model'. A2.5.1 asks you to list the routers, physical firewalls or virtual firewalls used to create sub-sets, and notes that software firewalls built into operating systems cannot define the scope boundary.

There are consequences. The A2.1 guidance says a partial organisation means some networks are excluded from scope, and v3.3 says you will need to justify a partial scope to your assessor. A2.2 notes that a partial certificate's scope description will read 'Partial Organisation, see certificate platform for details'. If the devices you are excluding run unsupported firmware, v3.3 is stricter: unsupported software must be removed, or removed from scope by using a defined sub-set that prevents all traffic to or from the internet. IASME's scope FAQ defines that: 'No internet access means that all inbound and outbound connections must be blocked at the boundary of the segregated network.' A camera VLAN that still reaches the vendor's cloud does not meet that test.

Our interpretation: for most small organisations it is simpler to keep cameras and phones in a whole-organisation scope on their own VLAN, with passwords changed and firmware updated, than to declare a partial scope. See sub-set and VLAN in the glossary.

Do default passwords on smart devices matter?

Yes for any device that is in scope, and as good practice for printers and segregated devices. The secure configuration control is written for 'computers and network devices' and says you must regularly change any default or guessable account passwords and remove or disable unnecessary software, including network services. It warns that out-of-the-box configurations often include 'an administrative account with a pre-set, publicly known default password', which describes most NVRs, IP phones and printers as delivered.

The scheme requires it for routers, firewalls and any camera, phone or controller you keep in scope. For printers, which IASME treats as out of scope, and for devices on a segregated sub-set, it is recommended, not required: change the admin password to a unique one in your password manager and turn off web, Telnet, FTP and SNMP services you do not use. See default password.

Does smart device firmware need updating within 14 days?

The requirements set the 14-day rule explicitly only for router and firewall firmware; for cameras, phones and other smart devices it applies only if the device is in scope, and printers are out of scope. A6.1 says the firmware of firewall or router devices in scope 'is considered to be an operating system', and A6.4 says the 14-day rule for high-risk or critical fixes 'includes the firmware on your firewalls and routers'. A No to A6.4 is an automatic fail.

Our interpretation: if a camera, phone or building controller is in scope, its firmware is software on an in-scope device and meets the same rule: vendor-supported, with critical fixes applied within 14 days. The A6.3 guidance warns that for some operating systems, firmware and applications, updates stop if annual licensing is not purchased, which is common with NVR and building management software. Where such a device has reached end of support, replace it or move it into a sub-set that blocks all traffic to or from the internet. See firmware.

Will a Cyber Essentials Plus assessor test printers and cameras?

Not in the device sample, but the external scan can find them. The CE Plus Test Specification v3.2 applies its sampled tests to 'end user devices (EUDs) that can connect to organisational data or services', 'all internally hosted servers' and 'all types of cloud service', and printers, cameras and phone handsets are none of those. Test case 1, the external vulnerability scan, covers 'all IP addresses associated with the Applicant', so a printer or NVR exposed through a port forward will show up and be judged like any other exposed service.

How do I describe smart devices in the question set?

Printers are not listed at all; other smart devices appear in up to four places, because there is no device-count question for them. A2.4 asks for each network by name, location and purpose, so an in-scope 'Building systems VLAN at head office for CCTV and door access' belongs there. If you exclude it instead, describe it in A2.2.1, explain the method in A2.2.2 (for example 'IoT network, segregated by VLAN') and list the enforcing firewall or router in A2.5.1. Vendor portals for cloud cameras, cloud print, hosted telephony and door access go in A2.9, and the MFA questions A7.16 and A7.17 then apply to them. Any port forward for remote viewing belongs in the A4.8 description of approved inbound connections, with the business need.

How do assessors check smart devices and printers in scope?

What they look for
Common failure: The port-forwarded CCTV recorder

Related requirements

Frequently asked questions

No. IASME's Knowledge Hub says printers are not deemed to be in the scope of Cyber Essentials, and no Danzell question asks for them. List a cloud print portal in A2.9 if staff sign in to it, and document any port forward to a printer at A4.8. Changing the printer's default password is still good practice.

IASME gives no answer on handsets. v3.3 names IP telephony as an example of an organisational service, and our interpretation is that a hosted phone system that stores your call data behind an account is a cloud service, so list it in A2.9 with MFA. Change default handset admin PINs and keep firmware updated.

Yes, a VLAN or firewall is the only compliant way to create a sub-set, and a guest Wi-Fi network only counts if it is one of those. Excluding a network makes your certificate a partial-organisation scope, which you describe in A2.2.1 and A2.2.2 and justify to the assessor. If the devices run unsupported software, the sub-set must block all traffic to or from the internet.

No. The A2.2.2 guidance says security groups, microsegmentation and software-based methods are not compliant for creating sub-sets, and A2.5.1 says software firewalls built into operating systems cannot define the boundary of the scope.

If it is accessed through an account and stores or processes data for your organisation, it meets the v3.3 cloud service definition. Cloud services cannot be excluded from scope, so list it in A2.9 and enforce MFA where the service offers it.

Free readiness check

Would you pass the 2026 question set?

Answer 24 yes or no questions, built by Precursor Security, an IASME Cyber Essentials Certification Body, and get a readiness score in about five minutes, with any auto-fail questions you miss flagged first in your results.

  • IASME Certification Body
  • CREST accredited
  • UK offices in Leeds, Newcastle, London and Edinburgh
Sources